Protech Power strives to conduct its business with a total commitment to its Customers and their requirements. |
|
Our Services
Protech Power & NHP CUBIC Modular Switchboard Systems:
The NHP CUBIC modular switchboard system permits a vast array of possibilities and great versatility for constructing Main Switchboards, Motor Control Centres, Distribution Boards, Power Factor Correction Cubicles and Control Panels. The switchboard system also makes it easy to design a switchboard to suit almost any installation. Whether a switchboard is already in service or at a switchboard manufacturer, switchboards can be easily extended or modified as the needs of the installation change. In addition to being easy to design, the modular system is fast to assemble.
More Information....
Protech Power can supply a wide range of modular and customised switchboards built to your specifications using NHP CUBIC Modular Switchboard Systems.
General
Cubic Applications Main Switchboard, Distribution Boards, Motor Control
Centres, Power Factor Correction and Custom Control Panels
Standards built to AS/NZS 3439.1; 2002, including arc fault containment tests,
IEC 60439-1: 1999
Mechanical
Construction of switchboard Box and frame types, both 100 % modular designs
Degree of protection IP 43, IP 54 optional
Segregation Form 1 up to Form 4 b
Mounting types Fixed, demountable or fully withdrawable
Sheet steel construction Outside panels are 1.5 mm steel and the base of 3 mm steel
Mounting plates are of 2.5 mm steel plate
Stainless steel construction The outside panels can be supplied in 316 Stainless Steel,
while the inside and base remain as above
Colours/finish - Exterior Grey RAL7035
Orange RAL 2000
70 micron lacquered powder coat
Other colours available on request
Colours/finish - Interior Galvanised steel or powder coated grey
Dimensions
All Cubic width, height and depth dimensions are measured in multiples of 192 mm which are called “modules”. Multiples of modules are indicated by the designations: 1M, 2M, 3M…12M etc. For example, individual tiers for motor control applications can be up to 4 Modules wide.
Box construction type
(bolt together sides)
Maximum: W: 10M, H: 10M, D: 2M (M = module)
Frame construction type
(with frame + covers)
Maximum modules per plinth: W: 12M, H: 12M, D: 4M
There are no limits on multiples of the above being used
for Width, Height, Depth when using panel types
Electrical
Main horizontal and vertical busbar ratings Up to 7000 A
Poles 3 or 4 pole
Rated short time withstand current (Icw) 120 kA for 1 second or 50 kA for 3 seconds
Rated peak withstand current (Ipk) Up to 264 kA
Voltages Rated Insulation voltage 1000 V AC as standard
Voltages Rated Operating voltage 1000 V AC as standard
Rated impulse withstand voltage 8 kV
Rated Frequency 50 - 60 Hz
Arc fault containment Tested to: AS/NZS 3439.1: 2002, Annex ZD
| Brisbane | T +61 7 3440 6500 F +61 7 3440 6555 E brisbane@protech-power.com 2 Prospect Place, Berrinba Qld 4117 PO Box 1086, Browns Plains QLD 4118 |
Townsville | T +61 7 4789 8000 F +61 7 4789 8001 E townsville@protech-power.com 138 – 142 Webb Drive, Bohle, QLD 4818 PO Box 7094, Garbutt, QLD 4814 |
   |
